The beverage manufacturer selected the Fristam PL03 Powder Dissolver for its new production facility.
A total of six PL03 Powder Dissolvers were installed:
- Five PL03 units for concentrated flavour syrup production
- One PL03 dedicated to preparing dextrose solutions used during secondary fermentation
Instead of carrying ingredient bags onto an elevated platform, operators could introduce powdered ingredients through the PL's conveniently positioned induction hopper at approximately waist height.
Liquid is recirculated through the system while powder is drawn directly into the moving liquid stream. This enables powders to be rapidly incorporated, dispersed and dissolved before the product returns to the vessel.
Production set-up
1. Liquid Recirculation
Liquid from the syrup preparation vessel is circulated through the Fristam PL Powder Dissolver and returned to the tank, creating a continuous recirculation loop.
2. Ground-Level Powder Addition
Operators introduce powdered ingredients directly into the PL induction hopper. This removes the routine need to carry ingredient bags onto elevated platforms and manually empty them into an open mixing vessel.
3. Rapid Powder Induction
Powder is drawn directly into the moving liquid stream and rapidly incorporated into the recirculating product.
The PL03 has a maximum powder induction capability of up to 4,000 kg/h / (150 lb/min), depending on the powder, liquid and individual process conditions.
4. High-Speed Powder Dissolving and Ingredient Incorporation
For key ingredients used in this beverage application, including citric acid and sodium citrate, the installed systems achieved powder induction rates of up to approximately 1,100 kg/h (approximately 40 lb/min).
This enabled substantial quantities of powdered ingredients to be introduced quickly without relying on slow incorporation from the surface of the mixing tank.
5. Concentrated Beverage Syrup Preparation
Acids, preservatives, flavours, sweeteners, gums and other ingredients are incorporated to create a consistent concentrated beverage syrup.
The completed concentrate can then move to the next stage of production, where it is blended with water and alcohol to produce the final beverage.
6. High-Volume Beverage Production
The five PL systems dedicated to syrup production support multiple batches throughout the production day.
During peak production periods, the facility can manufacture approximately five to six syrup batches per PL machine per day.
Importantly, the installation also demonstrated the PL's ability to perform under challenging real-world process conditions. Long recirculation pipework and numerous elbows reduced the available suction, yet the systems continued to achieve the powder induction rates required by the customer.